1. Yêu cầu
2. Mô hình
3. Mô tả lab
Các thiết bị đã được lắp đặt và được nối bằng cáp FastEthernet.
Router CME kết nối trực tiếp tới router PSTN bằng cáp E1 back-to-back.
Bước 1: Gán địa chỉ
Sử dụng địa chỉ theo như mô hình, gán địa chỉ IP cho các cổng f0/0.10 và f0/0.20 của Router CME.
Cấu hình router CME:
hostname CME
interface f0/0
description Ket noi toi switch PoE
no ip address
no shutdown
exit
interface f0/0.1
description Ket noi toi Management VLAN
encapsulation dot1q 1 native
ip address 10.1.1.254 255.255.255.0
exit
interface f0/0.10
description Ket noi toi Voice VLAN
encapsulation dot1q 10
ip address 10.1.10.254 255.255.255.0
exit
interface f0/0.20
description Ket noi toi Data VLAN
encapsulation dot1q 20
ip address 10.1.20.254 255.255.255.0
exit
line vty 0 4
privilege level 15
no login
exit
line console 0
logging synchronous
exit
no ip domain-lookup
Cấu hình switch PoE:
hostname PoE
interface vlan 1
description Dat IP quan ly cho switch
ip address 10.1.1.253 255.255.255.0
no shutdown
exit
interface f0/24
description Ket noi toi router CME
switchport trunk encapsulation dot1q
switchport mode trunk
exit
vlan 10
exit
vlan 20
exit
interface f0/1
description Ket noi toi IP Phone 1001
switchport mode access
switchport access vlan 20
switchport voice vlan 10
spanning-tree portfast
exit
interface f0/2
description Ket noi toi IP Phone 1002
switchport mode access
switchport access vlan 20
switchport voice vlan 10
spanning-tree portfast
exit
interface f0/3
description Ket noi toi IP Phone CIPC 1003
switchport mode access
switchport access vlan 10
spanning-tree portfast
exit
line vty 0 4
privilege level 15
no login
exit
line console 0
logging synchronous
exit
no ip domain-lookup
Bước 2: Cấu hình dịch vụ DHCP trên router CME
Trên router CME, khởi tạo 2 dải DHCP Pool để cấp IP:
ip dhcp excluded-address 10.1.10.254
ip dhcp pool Voice
network 10.1.10.0 255.255.255.0
default-router 10.1.10.254
option 150 ip 10.1.10.254
exit
ip dhcp excluded-address 10.1.20.254
ip dhcp pool Data
network 10.1.20.0 255.255.255.0
default-router 10.1.20.254
exit
Bước 3: Cấu hình dịch vụ “telephony-service” trên router CME
Tiến hành cấu hình dịch vụ “telephony-service” cấp số điện thoại xuống cho các IP Phone tương ứng như trong sơ đồ.
clock set 6:30:00 13 May 2015
configure terminal
telephony-service
ip source-address 10.1.10.254 port 2000
max-dn 144
max-ephones 42
create cnf-files
no auto-reg-ephone
exit
ephone-dn 1 dual-line
number 1001
exit
ephone-dn 2 dual-line
number 1002
exit
ephone-dn 3 dual-line
number 1003
exit
ephone 1
mac-address b000.b4d8.8e95
type 7965
button 1:1
codec g711ulaw
restart
exit
ephone 2
mac-address b000.b4d9.a3b1
type 7965
button 1:2
codec g711ulaw
restart
exit
ephone 3
mac-address 24b6.fd47.139e
type CIPC
button 1:3
codec g711ulaw
restart
exit
Bước 4: Cấu hình kết nối E1 interface trên router CME
Kiểm tra card E1/T1 và module PVDM2 có được router nhận ra chưa. Chú ý các slot number và subslot number vì các cổng tạo ra về sau trên router sẽ dùng các số này.
CME# show diag
Slot 0:
C2811 Motherboard with 2FE and integrated VPN Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time 00:13:24 ago
Onboard VPN : v2.3.3
EEPROM contents at hardware discovery:
PCB Serial Number : FOC14322S0J
Hardware Revision : 1.0
Top Assy. Part Number : 800-26920-09
Board Revision : B0
Deviation Number : 0
Fab Version : 04
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 87
Hardware date code : 20100812
Chassis Serial Number : FHK1434F1N0
Chassis MAC Address : 58bc.2739.9a10
MAC Address block size : 24
CLEI Code : COMHT00ARC
Product (FRU) Number : CISCO2811
Part Number : 73-10258-08
Version Identifier : V10
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 34 33 32 32 53 30 4A 40
0x10: 03 E7 41 01 00 C0 46 03 20 00 69 28 09 42 42 30
0x20: 88 00 00 00 00 02 04 03 00 81 00 00 00 00 04 00
0x30: 09 87 83 01 32 B6 CC C2 8B 46 48 4B 31 34 33 34
0x40: 46 31 4E 30 C3 06 58 BC 27 39 9A 10 43 00 18 C6
0x50: 8A 43 4F 4D 48 54 30 30 41 52 43 CB 8F 43 49 53
0x60: 43 4F 32 38 31 31 20 20 20 20 20 20 82 49 28 12
0x70: 08 89 56 31 30 00 D9 03 40 C1 C2 FF FF FF FF FF
PVDM Slot 0:
48-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
Hardware Revision : 4.0
Part Number : 73-8540-05
Board Revision : B0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC11510AJ1
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : PVDM2-48
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 ED 41 04 00 82 49 21 5C 05 42 42 30
0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 31 35 31
0x20: 30 41 4A 31 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 88 50 56 44 4D 32 2D 34 38 89 56 30 31 20 D9 02
0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 2:
VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1
Hardware Revision : 0.0
Top Assy. Part Number : 800-22629-05
Board Revision : C0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC14515WSQ
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : VWIC2-2MFT-T1/E1
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 FC 41 00 00 C0 46 03 20 00 58 65 05
0x10: 42 43 30 88 00 00 00 00 02 04 C1 8B 46 4F 43 31
0x20: 34 35 31 35 57 53 51 03 00 81 00 00 00 00 04 00
0x30: CB 90 56 57 49 43 32 2D 32 4D 46 54 2D 54 31 2F
0x40: 45 31 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
AIM Module in slot: 1
Service Engine AIM: 1
Hardware Revision : 1.0
Top Assy. Part Number : 800-20063-06
Board Revision : B0
Deviation Number : 0
Fab Version : 05
PCB Serial Number : FOC12166CQU
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : AIM-CUE
Version Identifier : V03
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 8E 41 01 00 C0 46 03 20 00 4E 5F 06
0x10: 42 42 30 88 00 00 00 00 02 05 C1 8B 46 4F 43 31
0x20: 32 31 36 36 43 51 55 03 00 81 00 00 00 00 04 00
0x30: CB 87 41 49 4D 2D 43 55 45 89 56 30 33 20 FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
CME#
CME# show version
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 15.1(4)M8, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 07-Mar-14 08:19 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T11, RELEASE SOFTWARE (fc1)
CME uptime is 15 minutes
System returned to ROM by power-on
System restarted at 06:17:32 UTC Wed May 13 2015
System image file is "flash:c2800nm-adventerprisek9-mz.151-4.M8.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2811 (revision 1.0) with 772096K/14336K bytes of memory.
Processor board ID FHK1434F1N0
2 FastEthernet interfaces
1 terminal line
2 Channelized (E1 or T1)/PRI ports
1 Virtual Private Network (VPN) Module
1 cisco service engine(s)
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
1000440K bytes of ATA CompactFlash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO2811 FHK1434F1N0
Configuration register is 0x2142
CME#
CME# show inventory
NAME: "2811 chassis", DESCR: "2811 chassis"
PID: CISCO2811 , VID: V10, SN: FHK1434F1N0
NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 2", DESCR: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1"
PID: VWIC2-2MFT-T1/E1 , VID: V01 , SN: FOC14515WSQ
NAME: "PVDMII DSP SIMM with three DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with three DSPs"
PID: PVDM2-48 , VID: V01 , SN: FOC11510AJ1
NAME: "AIM Service Engine 1", DESCR: "AIM Service Engine"
PID: AIM-CUE , VID: V03 , SN: FOC12166CQU
CME#
Xác định DSP resource.
CME# show voice dsp group all
DSP groups on slot 0:
dsp 1:
State: UP, firmware: 28.3.11
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 16
Transcoding channels allocated: 0
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 240, reserved credits: 0
Signaling channels allocated: 16
Voice channels allocated: 0
Credits used (rounded-up): 0
dsp 2:
State: UP, firmware: 28.3.11
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 14
Transcoding channels allocated: 0
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 240, reserved credits: 0
Signaling channels allocated: 14
Voice channels allocated: 0
Credits used (rounded-up): 0
dsp 3:
State: UP, firmware: 28.3.11
Max signal/voice channel: 16/16
Max credits: 240
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 0
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 240, reserved credits: 0
Signaling channels allocated: 0
Voice channels allocated: 0
Credits used (rounded-up): 0
DSP groups on slot 1:
This command is not applicable to slot 1
DSP groups on slot 2:
This command is not applicable to slot 2
0 DSP resource allocation failure
CME#
Cấu hình để chuyển card sang hoạt động ở chế độ E1. Sau khi thực hiện câu lệnh “card type e1 0 2”, đèn trên card VWIC2-2MFT-T1/E1 sẽ sáng lên.
CME(config)#card type ?
e1 E1
t1 T1
CME(config)#card type e1 ?
<0-2> Card slot number
CME(config)#card type e1 0 ?
<0-3> WIC slot number (0:WIC, 1:Onboard for NM-HDV2)
CME(config)#card type e1 0 2
Dùng lệnh network-clock-participate để router lấy thời gian và đồng bộ thời gian từ đường truyền E1.
CME(config)#network-clock-participate ?
aim AIM Module
slot Network Module Slot
wic WIC Module
CME(config)#network-clock-participate wic ?
<0-3> Slot Number (physical)
CME(config)#network-clock-participate wic 0
WIC slot is empty or does not support clock participate
CME(config)#network-clock-participate wic 2
Dùng lệnh network-clock-select để router đồng bộ thời gian từ card E1.
CME(config)#network-clock-select ?
<1-8> priority
CME(config)#network-clock-select 1 ?
E1 E1 controller
CME(config)#network-clock-select 1 e1 ?
<0-0> Controller slot number
CME(config)#network-clock-select 1 e1 0/?
<2-2> Controller subslot or port number
CME(config)#network-clock-select 1 e1 0/2/?
<0-1> Controller port number
CME(config)#network-clock-select 1 e1 0/2/0
Dùng kiểu tổng đài ISDN là primary-ni hoặc primary-net5.
CME(config)#isdn switch-type ?
primary-4ess Lucent 4ESS switch type for the U.S.
primary-5ess Lucent 5ESS switch type for the U.S.
primary-dms100 Northern Telecom DMS-100 switch type for the U.S.
primary-dpnss DPNSS switch type for Europe
primary-net5 NET5 switch type for UK, Europe, Asia and Australia
primary-ni National ISDN Switch type for the U.S.
primary-ntt NTT switch type for Japan
primary-qsig QSIG switch type
primary-ts014 TS014 switch type for Australia (obsolete)
CME(config)#isdn switch-type primary-ni
Link phần 2: LAB-CME
